As an edtech consultant, a common question I’m asked by teachers and school leaders these days is “Which screencasting software is best?”
In this post I’m going to recommend the screencasting tool that I think is the best for the majority of teachers. But first I’ve briefly reviewed each of 15 other contenders, in each case outlining it’s pros and cons – and pronouncing a verdict on it.
There is no single best tool to use. So much depends on the type of computer you use (Mac or PC*), how comfortable you are with video-editing software, how much time you want to spend making your screencasts and how professional and fancy you want your screencasts to be. There’s also an element of personal preference regarding interface design. So my recommendation at the end of this post is no more than my professional opinion.
I’ve bought and used each of the software titles below, and I’ve run Professional Development workshops on each of them over the years, as well as making screencasts for my own students since 2006 and having students make and publish screencasts as part of their own learning journey.
[*NB. In this post I have focussed on computer screencasting tools – if you are interested in iPad tools have a look at this previous post]
Like most Adobe software, this is a tool for über-professionals. It’s adobeously expensive (@ $435 per license), and its interface and workflow is frustratingly non-intuitive for the uninitiated, and it takes me hours to do what I can do in other software in minutes, but you end up with very slick screencasts, and file sizes that are relatively small. If you are a professional screencaster (Ie.If you’ve been employed to make screencasts and that is your whole job) then you should probably have a look at it. For everyone else, keep reading.
Verdict: I don’t recommend it for teachers.
Very powerful PC-only software that lets me do almost everything I would want to do in an educational screencast, but I rarely recommend it to teachers who are starting out in screencasting because it costs $179 per license (education pricing) and requires a very steep learning curve.
Verdict: I recommend it only for teachers who have already done some screencasting, are quite comfortable with a PC and demand a professional result.
Although also made by Techsmith, Camtasia:Mac is not the same as Camtasia Studio. It has some really cool, but arguably superfluous features (special effects and filters), is less complicated to use than Camtasia Studio, is less expensive (but still costs $75) and is still somewhat fiddly to use until you get familiar with its tools.
Verdict: I recommend it for teachers who are fairly comfortable with their Mac, have already made some screencasts and want to experiment with cool effects.
Telestream’s Screenflow is my personal favourite screencasting tool (by quite a margin) and the one I most often turn to for my own screencasts, but I seldom recommend it to teachers because like Camtasia:Mac it’s expensive ($110), is Mac-only and is so feature-rich that many teachers are likely to find it daunting and time consuming. However, if you are a Mac user and fairly comfortable with multi-track video editing software, I think it’s worth both the money and the learning curve. It has a high power:complexity ratio. It punches well above it’s weight in that regard.
Verdict: I recommend it for Mac users who are pretty good with a computer, have made some screencasts and now want screencast super-powers.
Please don’t confuse CamStudio with Camtasia Studio. It has almost nothing in common with Techsmith’s powerful offerings (except that it has shamelessly piggy-backed on Camtasia’s good name). CamStudio is an ugly, basic, kludgy, PC-only, dinosaur. There are no good reasons to use it. Even if you don’t want to spend a cent, you’ll find better choices below. Keep reading.
Verdict: Keep walking, there’s nothing to see here.
Screenr is a web-based, Java tool. As such it doesn’t require you to install anything on your computer (you simply go to screenr.com and click the record button) but the downside is that you have to have an internet connection and it’s slow to use because you have to wait for the video to upload before you can then download and save it. It doesn’t let you record your webcam, and only lets you record for 5 minutes. This is the sort of software that seems simple to use – but ends up creating frustration.
Verdict: Maybe if your IT department won’t let you install software … but even then, there are better options. (See Screencast-O-Matic below.)
Jing is another screencasting tool by Techsmith. If you take all the pros and cons of Camtasia Studio and flip them, you have Jing. It’s completely free, has a super-simple interface (probably the easiest of all the tools to use), but it lacks features: You can’t record your webcam, you can’t annotate your videos. It also has significant limitations: You can’t record for more than 5 minutes and worst of all, it only publishes videos in .swf format which won’t play natively on iOS devices. That’s a deal-breaker for me. What’s even worse, the particular .swf files produced can’t be converted to mp4 even with professional file-conversion utilities. This means there is no way to edit them – unless you buy Camtasia Studio, which can edit Jing files.
Jing is free for a reason. Techsmith has positioned it as a gateway drug – it starts with Jing and before you know it you’re using SnagIt or Camtasia.
Verdict: Friends don’t let friends use Jing.
Techsmith is smart. They know that Jing is going to frustrate you. So they provided yet another simple tool that is very similar to Jing in every way but without some of the frustrations: Ie. you can record for as long as you want and your videos are published in mp4 format. But this time it’s not free. It costs $30. It’s reasonably good but expensive for what you get. It punches below it’s weight.
Verdict: A nice program – but lacking features and expensive for what it is. I think it’s worth $10, not $30.
Community Clips is a Microsoft labs experiment. It’s available for free from various sites on the web (but not directly from Microsoft, anymore). It does a reasonable job of recording the screen, but that’s all it does. It’s probably about equal to SnagIt – except it’s free. The videos can, of course, be edited in Movie Maker if necessary.
Verdict: If you are a PC user, this is a better choice than Jing – at least the files can be edited in MovieMaker. Still, there are better choices for features and flexibility.
[Thanks to Thomas Gaffey for reminding me to include this one]. Expression Encoder is more full-featured than Community Clips and is still able to be downloaded from Microsoft. Like Community Clips it’s free – but unlike Community Clips it allows you to record both your screen and your webcam and it affords you basic editing options once recording is finished (you can cut sections out, for example). The workflow is less obvious than some other apps. You first record the video and then send it to a separate editor application. This always feels a bit confusing to new users at first but don’t let that put you off. It’s not difficult to do once you’ve done it once. And doing this will stand you in good stead, should you decide later to upgrade to Camtasia Studio – because that is how Camtasia works, too. It’s not hard to do once you understand the workflow.
Verdict: I’d recommend this to PC users as a good option. If you are a PC user, currently using Community Clips, SnagIt, Jing, Screenr, or CamStudio, you’d be better off with Expression Encoder.
[Thanks to Chris Russell @choirguy_ for pointing out that I had neglected this one in my original post – shame on me! ] QuickTime Player comes installed on every Mac. What lots of people don’t realise is that it has a screen recording feature built right into it! Simply go to File > New Screen Recording. It actually works very well, though it’s fairly featureless – being about equal, feature-for-feature with Community Clips and SnagIt. But it is free (unlike SnagIt) and a huge boon is that it’s already there on a teacher’s machine, installed and ready to go. Unfortunately QuickTime Player for Windows does not have this feature – so it’s a Mac-only boon.
Verdict: For Mac users wanting to quickly make a screencast with no fuss and without even downloading / installing anything – QuickTime Player is already there at the ready.
12. Snapz Pro
Snapz Pro (Mac only) has been around for years. It’s the first screencasting tool I ever used. It has similar features to SnagIt or QuickTime Player but even more expensive ($65).
Verdict: Not my choice anymore, and too expensive.
iShowU by Shinywhitebox is an evolving platform. It used to be too feature-poor for the price tag ($30) but now they have added the ability to record the webcam, editing and other power-user features similar to some of those in Screenflow and Camtasia. So far though I’ve been disappointed with its performance. It seems to crash a lot and is a bit buggy.
Verdict: I think it will eventually be a great choice for Mac users, but I can’t recommend it at the moment – It’s still too buggy.
I hear a lot of buzz around Voilá but personally I think it’s over-hyped at $32. It’s a pretty handy screen capture tool (for still screenshots) but that is not what I am really reviewing in this post. As a screencasting tool, Voilá would not be my choice. It allows you to record your screen like any screencasting tool does, or it allows you to record your webcam – but disappointingly, not both at the same time. So for screencasting I’d say it’s about as useful as SnagIt – at about the same price.
Collaaj does something that no other platform discussed here does. Not only does it work on Mac or PC but there is also an iPad app. It’s pretty good too – it lets you record your webcam as well as the screen, and all the video is handled by Collaaj’s servers which makes for very easy sharing with your students and vice versa. It lets you record your webcam (or FaceTime camera on the iPad) – which is something SnagIt and Jing and several others don’t allow. Unfortunately the free version only lets you record for 2 minutes which is just too short to be useful. There are a range of paid plans (a subscription model) that range from $5 – $75 per month depending on your needs. For some schools this might be a good choice but I think the subscription model is probably a deal-breaker for many.
Verdict: I may recommend it, especially in a BYOD school, depending on your budget.
I think Screencast-O-Matic hits the sweet spot in terms of features, ease of use and price. It’s free. It records your webcam as well as your screen, it couldn’t be very much easier to use, and it has some really nice features that you don’t get in any other free screencasting software. For example, when you click your mouse, it inserts a visible and audible click. There is a Mac version, a Windows version and you have the option of launching it as a Java applet from screencast-o-matic.com without installing any software on your computer. This makes it really versatile and useful. The huge advantage of it being free is that you can ask students to install it on their computers without worrying about hitting the pocket-nerve of their parents.
Videos can be saved to your computer as an mp4, uploaded directly to YouTube or published to Screencast-O-Matic’s own video-sharing server (useful if YouTube has not yet been unblocked by your IT department).
While Sceencast-O-Matic is free to use, it will limit you to 15 minutes and puts a small “Screencast-O-Matic” watermark in the lower left corner of the final published video. There is a Pro version which unlocks a LOT more features. The pro version gives you video editing (delete that cough!), the ability to record system audio, and the ability to record for longer than 15 minutes. It also records videos in higher definition, allows publishing in more video formats, removes the watermark – and more. I think most teachers will find that the free version is all they need. But for those who want to take it up a notch – without going all the way to Camtasia Studio or Screenflow, the Pro version of Screencast-O-Matic only costs $15/year.
Verdict: I’d recommend it to almost any teacher who is starting out in screencasting. The free version is better than any other free tool i’ve found and it’s even better than most of the paid tools. The Pro version (for just $15) is better than anything except the really pro tools such as Screenflow and Camtasia, but much more affordable, and easier to use.
These are not the only choices of course. This is an exploding market. Have you used one that you would recommend?
[Edit: I have – and it’s so compelling I wrote a whole new post about it here].
[Edit: January 19, 2017 – if you want to purchase Screencast-O-Matic Pro with a 20% discount, you can use this link.